Reference Guide

Version 7.4.1.0 Introduced.
disable
Disable the resilient ring protocol.
S4820T
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced.
interface
Configure the primary, secondary, and control-vlan interfaces.
S4820T
Syntax
interface {primary interface secondary interface control-vlan
vlan-id}
To return to the default, use the no interface {primary interface secondary
interface control-vlan vlan-id} command.
Parameters
primary interface Enter the keyword primary to configure the primary interface then
one of the following interfaces and slot/port information:
• Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
510