Reference Guide

GVRP for VLAN updates. But if the local bridge must know only how to reach a given VLAN, then GVRP provides

all necessary information.

• The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The

GVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is

disabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged all

VLANs that were manually configured.

clear gvrp statistics

Clear GVRP statistics on an interface.

S4820T

Syntax

clear gvrp statistics interface interface

Parameters

interface

Enter the following keywords and slot/port or number information:

• For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Defaults none

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series

Commands

show gvrp statistics — displays the GVRP statistics.

518