Reference Guide

Usage
Information
Fixed registration prevents an interface, configured using the command line, to belong to a
VLAN (static configuration) from being unconfigured when it receives a Leave message.
Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port’s membership in the VLAN depends on
GVRP. The interface becomes a member of a VLAN after learning about the VLAN through
GVRP. If the VLAN is removed from the port that sends GVRP advertisements to this device, the
port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you
do not want the interface.
Related
Commands
show gvrp — displays the GVRP configuration including the registration.
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
S4820T
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
disable — globally disables GVRP.
523