Reference Guide

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series

ExaScale.

Version 7.6.1.0 Introduced on the S-Series and added the SSH port number to the

SCP prompt sequence on all systems.

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage

Information

FTOS supports a maximum of 100 files at the root directory level, on both the internal and

external Flash.

When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the

keywords and FTOS prompts you need for the rest of the information. For example, when using

SCP, you can enter copy running-config scp: where running-config is the

source and the target is specified in the ensuing prompts. FTOS prompts you to enter any

required information, as needed for the named destination—remote destination, destination

filename, user ID, password, etc.

When you use the copy running-config startup-config command to copy the

running configuration (the startup configuration file amended by any configuration changes

made since the system was started) to the startup configuration file, FTOS creates a backup

file on the internal flash of the startup configuration.

FTOS supports copying the running-configuration to a TFTP server or to an FTP server. For

example:

• copy running-config tftp:

• copy running-config ftp:

Example

FTOS#copy running-config scp:/

Address or name of remote host []: 10.10.10.1

Destination file name [startup-config]? old_running

User name to login remote host? sburgess

Password to login remote host? dilling

In this copy scp: flash: example, specifying SCP in the first position indicates that the

target is to be specified in the ensuing prompts. Entering

flash: in the second position

indicates that the target is the internal Flash. The source is on a secure server running SSH, so

you are prompted for the user datagram protocol (UDP) port of the SSH server on the remote

host.

Example

FTOS#copy scp: flash:

Address or name of remote host []: 10.11.199.134

Port number of the server [22]: 99

Source file name []: test.cfg

User name to login remote host: admin

Password to login remote host:

Destination file name [test.cfg]: test1.cfg