Reference Guide

show ip management-eis-route
Display the management routes used by EIS.
S4820T
Syntax
show ip management-eis-route
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
FTOS#show ip management-eis-route
Destination Gateway State Route Source
----------- ------- ----- ------------
10.11.0.0/16 ManagementEthernet 0/0 Connected Connected
172.16.1.0/24 10.11.192.4 Active Static
show management application pkt-cntr
Display the number of packets for each application type that have taken the management route.
S4820T
Syntax
show management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
FTOS#show management application pkt-cntr
dns : 2
ftp : 0
ntp : 0
radius : 0
sflow-collector : 0
snmp : 0
ssh : 0
syslog : 0
tacacs : 0
telnet : 0
tftp : 0
620