Reference Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series. Modified to display the LAG failover
group status.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following describes the show interfaces port-channel command shown in the
following example.
Field Description
Port-Channel 1... Displays the LAG’s status. In the Example, the status of the LAG’s
LAG fate-sharing group (“Failover-group”) is listed.
Hardware is... Displays the interface’s hardware information and its assigned MAC
address.
Port-channel is
part...
Indicates whether the LAG is part of a LAG fate-sharing group
(“Failover-group”).
Internet address... States whether an IP address is assigned to the interface. If an IP
address is assigned, that address is displayed.
MTU 1554... Displays link and IP MTU.
LineSpeed Displays the interface’s line speed. For a port channel interface, it is
the line speed of the interfaces in the port channel.
Members in this... Displays the interfaces belonging to this port channel.
ARP type:... Displays the ARP type and the ARP timeout value for the interface.
Last clearing... Displays the time when the show interfaces counters were
cleared.
Queueing strategy. States the packet queuing strategy. FIFO means first in first out.
packets input... Displays the number of packets and bytes into the interface.
Input 0 IP packets... Displays the number of packets with IP headers, VLAN tagged
headers, and MPLS headers. The number of packets may not add
628