Reference Guide

Version 7.5.1.0 Introduced on C-Series

E-Series Original command

show boot system

Displays information about boot images currently configured on the system.

S4820T

Syntax

show boot system {stack-unit unit ID}

Parameters

stack-unit Enter the keyword stack-unit followed by a number to display

boot image information for a stack-unit.

The S4820T range is from 0 to 11.

Defaults none

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000

Version 8.3.7.0 Introduced on the S4810.

Version 7.7.1.0 Introduced on the C-Series and E-Series.

Example

FTOS#show boot system all

Current system image information in the system:

=============================================

Type Boot Type A B

---------------------------------------------

CP DOWNLOAD BOOT invalid invalid

RP1 DOWNLOAD BOOT invalid invalid

RP2 DOWNLOAD BOOT invalid invalid

linecard 0 is not present.

linecard 1 DOWNLOAD BOOT invalid invalid

linecard 2 DOWNLOAD BOOT 4.7.5.387 6.5.1.8

linecard 3 DOWNLOAD BOOT invalid invalid

linecard 4 DOWNLOAD BOOT invalid invalid

linecard 5 is not present.

Peer RPM:

=============================================

Type Boot Type A B

---------------------------------------------