Reference Guide

Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Related
Commands
ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
clear tcp statistics
Clear TCP counters.
S4820T
Syntax
clear tcp statistics [all | cp | rp1 | rp2]
Parameters
all Enter the keyword all to clear all TCP statistics maintained on all
switch processors.
cp (OPTIONAL) Enter the cp to clear only statistics from the Control
Processor.
rp1 (OPTIONAL) Enter the keyword rp1 to clear only the statistics from
Route Processor 1.
rp2 (OPTIONAL) Enter the keyword rp2 to clear only the statistics from
Route Processor 2.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
654