Reference Guide

boot system gateway — specifies the IP address of the default next-hop gateway for the
management subnet.
show file-systems
Display information about the file systems on the system.
S4820T
Syntax
show file-systems
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series
Version 7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
FTOS#show file-systems
Size(b) Free(b) Feature Type Flags Prefixes
63938560 51646464 dosFs2.0 MMC rw flash:
63938560 18092032 dosFs1.0 MMC rw slot0:
- - - network rw ftp:
- - - network rw tftp:
- - - network rw scp:
FTOS#
Command Fields
Field Description
size(b) Lists the size (in bytes) of the storage location. If the location is
remote, no size is listed.
Free(b) Lists the available size (in bytes) of the storage location. If the
location is remote, no size is listed.
Feature Displays the formatted DOS version of the device.
Type Displays the type of storage. If the location is remote, the word
network is listed.
Flags Displays the access available to the storage location. The following
letters indicate the level of access:
67