Reference Guide

17 0 1312
16 0 3932
15 0 1312
14 0 1312
13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
FTOS#
show ip cam stack-unit
Display CAM entries for an S-Series or Z-Series switch.
S4820T
Syntax
show ip cam stack-unit {id} [port-set {pipe-number} | hostname
{ip-address mask [longer-prefixes [ecmp-group detail]]}| ecmp-
group {detail | member-info [detail [group-index index-
number]]}| summary]
Parameters
id Enter the stack-unit ID. The unit ID range is from 0 to 11 for the
S4820T.
port-set pipe-
number
Enter the keyword port-set then the number of the stack unit’s
port-pipe.
The unit ID range is from 0 to 0 for the S4820T.
hostname Enter the hostname in A.B.C.D format.
network mask
[longer-prefixes
[ecmp-group
detail]]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries
for that route only. You can enter one of the following keywords to
filter results.
• Enter the keyword longer-prefixes to view routes with
a common prefix.
• Enter the keyword ecmp-group detail to view the
ECMP group index.
687