Reference Guide

00:01:e8:8a:d6:58 Te 0/8 0 2.1.1.2
FTOS#
show ip fib linecard
View all forwarding information base (FIB) entries.
S4820T
Syntax
show ip fib linecard slot-number [vrf vrf instance | ip-
address/prefix-list
| summary]
Parameters
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF
instance name to show the FIB cache entries tied to that VRF
instance.
slot-number Enter the number of the line card slot.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view
only information on that destination. Enter the IP address is dotted
decimal format (A.B.C.D). Enter the mask in slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total number of
prefixes in the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
The following describes the show ip fib command shown in the following example.
690