Reference Guide

configured (OPTIONAL) Enter the keyword configuration to display line
card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for
the running configuration and the start-up configuration.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2.(0.0) Added support for the tunnel and EIS interface types.
Version 9.0.0.0 Added support for the VLT option.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added the hardware-monitor option.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Expanded to include the last configuration change, start-up last
updated (date and time), and who made the change.
Version 6.5.4.0 Added the status option.
Example
FTOS#show running-config
Current Configuration ...
! Version 7.4.1.0
! Last configuration change at Tue Apr 10 17:43:38 2007 by
admin
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by
default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
Example
FTOS#show running-config status
running-config checksum 0xB4B9BF03
startup-config checksum 0x8803620F
FTOS#
Usage
Information
The status option allows you to display the size and checksum of the running configuration
and the startup configuration.
71