Reference Guide

Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 flowlabel-zero — Configure IPv6 address auto-configuration for the management
interface.
show ipv6 fib stack-unit
View all FIB entries.
S4820T
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number Enter the number of the stack unit. The range is from 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary of
entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks
that have more specific prefixes. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.4.2.1 Introduced on the S-Series.
735