Reference Guide

Version 8.2.1.0 Introduced on the E-Series ExaScale. Added support for the
managementethernet slot/port parameter.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
The Management port is enabled by default (no shutdown). If necessary, use the ipv6
address
command to assign an IPv6 address to the Management port.
Example
FTOS#
FTOS#show ipv6 int te 0/5
TenGigabitEthernet 0/5 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe8a:e8f7
Global Unicast address(es):
2001::1, subnet is 2001::/64
2002::1, subnet is 2002::/120
2003::1, subnet is 2003::/120
2004::1, subnet is 2004::/32
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:1
ff02::1:ff8a:e8f7
ND MTU is 0
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 0 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements live for 1800 seconds
FTOS#
Example
(Managementeth
ernet)
FTOS#
FTOS#show ipv6 int man 0/0
ManagementEthernet 0/0 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe8a:e8f7
Global Unicast address(es):
Actual address is 600::1, subnet is 600::/64
Virtual-IP IPv6 address is not set
Global Anycast address(es):
Joined Group address(es):
IPv6 Basics | 785
ff02::1
ff02::1:ff00:1
ff02::1:ff8a:e8f7
ND MTU is 1500
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 31000 milliseconds
ND base reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
ND hop limit is 64
FTOS#
738