Reference Guide

Example (Brief)
FTOS#show ipv6 interface brief
TenGigabitEthernet 0/44 [up/up]
fe80::201:e8ff:fe8b:3883
4001:2::3/64
ManagementEthernet 0/0 [up/up]
fe80::201:e8ff:fe8b:3883
33::1/64
Tunnel 45 [up/up]
fe80::201:e8ff:fe8b:3883
333::1/64
Port-channel 23 [up/up]
fe80::201:e8ff:fe8b:3883
110::1/64
Vlan 12 [up/up]
fe80::201:e8ff:fe8b:3883
400::1/64
FTOS#
Example (tunnel)
FTOS#show ipv6 interface tunnel 1
Tunnel 1 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fe04:62c4
Global Unicast address(es):
2001:db8::1, subnet is 2001::/64
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:1
ff02::1:ff04:62c4
MTU is 1500
ICMP redirects are not sent
DAD is enabled: number of DAD attempts: 1
ND reachable time is 30 seconds
ND advertised reachable time is 30 seconds
ND advertised retransmit interval is 30 seconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
show ipv6 mld_host
Display the IPv6 MLD host counters.
S4820T
Syntax
show ipv6 mld_host
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
739