Reference Guide

The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system
IDs.
S4820T
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap Enter a specific NSAP address that is associated with the name
parameter.
Defaults Not configured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Usage
Information
To configure a shortcut name that you can use instead of entering a long string of numbers
associated with an NSAP address, use this command.
Related
Commands
hostname dynamic — enables dynamic learning of host names from routers in the domain and
allows the routers to advertise the host names in LSPs.
759