Reference Guide

distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the network.
S4820T
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override
in command.
Defaults none
Command Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Added IPv6 ISIS support.
Version 6.3.1.0 Introduced.
Usage
Information
When you execute this command, IS-IS does not download the route to the routing table if the
same route was redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
S4820T
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password
using MD5.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you do not
specify an encryption type or hmac-md5 keywords, the
password is processed as plain text which provides limited security.
769