Reference Guide

Version 9.1.(0.0) Introduced on S4810.

Version 8.3.19.0 Introduced on the S4820T.

Usage

Information

Reboot the switch after changing the parameter values for changes to take effect.

For platform-specific instructions about using this command, refer to the

SDN

chapter in the

FTOS Configuration Guide

clear line

Reset a terminal line.

S4820T

Syntax

clear line {line-number | console 0 | vty number}

Parameters

line-number

Enter a number for one of the 12 terminal lines on the system. The

range is from 0 to 11.

console 0 Enter the keywords console 0 to reset the console port.

vty number

Enter the keyword vty then a number to clear a terminal line. The

range is from 0 to 9.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.1.1.0 Introduced on the E-Series ExaScale.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series Original command.