Reference Guide

When a channel member is added to a port-channel and there is not enough ACL CAM space,
the MAC limit functionality on that port-channel is undefined. When this occurs, un-configure
the existing configuration first and then reapply the limit with a lower value.
Related
Commands
clear counters — Clear counters used in the show interface command.
clear mac-address-table dynamic — clears the MAC address table of all MAC address learned
dynamically.
mac learning-limit mac-address-sticky — Replaces deprecated no-station-move
parameter.
show mac learning-limit — displays MAC learning-limit configuration.
mac learning-limit learn-limit-violation
Configure an action for a MAC address learning-limit violation.
S4820T
Syntax
mac learning-limit learn-limit-violation {log | shutdown}
To return to the default, use the no mac learning-limit learn-limit-
violation {log | shutdown} command.
Parameters
log Enter the keyword log to generate a syslog message on a learning-
limit violation.
shutdown Enter the keyword shutdown to shut down the port on a learning-
limit violation.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information
This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
829