Reference Guide

pre-Version
6.2.1.1
Introduced on the E-Series.
show cam mac linecard (dynamic or static)
Display the CAM size and the portions allocated for MAC addresses and for MAC ACLs.
S4820T
Syntax
show cam mac linecard slot port-set port-pipe [address mac_addr
| dynamic | interface interface | static | vlan vlan-id]
Parameters
linecard slot (REQUIRED) Enter the keyword linecard then a slot number to
select the linecard for which to gather information.
port-set port-pipe (REQUIRED) Enter the keywords port-set then a Port-Pipe number
to select the Port-Pipe for which to gather information. The range is
from 0 or 1.
address mac-
addr
(OPTIONAL) Enter the keyword address then a MAC address in the
nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses the switch dynamically learns.
interface
interface
(OPTIONAL) Enter the keyword interface then the interface type,
slot and port information:
• For a Port Channel interface, enter the keywords port-
channel
then a number.
• For a SONET interface, enter the keyword sonet then the
slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
static (OPTIONAL) Enter the keyword static to display only those MAC
addresses specifically configured on the switch.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the
MAC address assigned to the VLAN. The range is 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
833