Reference Guide

Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static),
learned dynamically (Dynamic), or associated with a specific port
(Sticky).
Interface Displays the interface type and slot/port information. The following
abbreviations describe the interface types:
• gi — Gigabit Ethernet then a slot/port.
• po — Port Channel then a number. The range is from 1 to 255
for TeraScale.
• so —SONET then a slot/port.
• te — 10 Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Example
FTOS(conf)#do show mac-address-table
Codes: *N - VLT Peer Synced MAC
VlanId Mac
Address Type Interface State
2 00:00:00:00:00:01 Dynamic (N) Po
128 Active
2 00:00:00:00:00:02 Dynamic (N) Po
10 Active
2 00:00:00:00:00:03 Dynamic Po
100 Active
2 00:00:00:00:00:04 Dynamic Po
10 Active
Usage
Information
The following describes the show mac-address-table command shown in the following
example.
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static),
learned (Dynamic), or associated with a specific port (Sticky). An (N)
indicates that the specified MAC address has been learnt by a
neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The following
abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port
• po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
• so — Sonet followed by a slot/port.
836