Reference Guide

Version 8.3.1.0 Added the vlan option on the E-Series.
Version 7.7.1.0 Introduced on the C-Series and S-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Example
FTOS#show mac-address-table aging-time
Mac-address-table aging time : 1800
FTOS#
Related
Commands
show mac-address-table — displays the current MAC address configuration.
show mac accounting destination
Display destination counters for Layer 2 traffic (available on physical interfaces only).
S4820T
Syntax
show mac accounting destination [mac-address vlan vlan-id]
[interface interface [mac-address vlan vlan-id] [vlan vlan-id]]
[vlan
vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format
to display information on that MAC address.
interface
interface
(OPTIONAL) Enter the keyword interface then the interface type,
slot and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the
MAC address assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
838