Reference Guide

pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
MAC Accounting information can be accessed using SNMP via the Force10 Monitor MIB. For
more information about enabling SNMP, refer to the FTOS Configuration Guide .
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an
increasing order using SNMP. As a workaround, you can use the -C c option in
snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example: %
snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
Example
FTOS-1#sh mac accounting destination interface gigabitethernet
2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
FTOS-1#
Related
Commands
show mac accounting access-list — displays the MAC access list configurations and counters
(if configured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
S4820T
Syntax
show mac learning-limit [violate-action] [detail] [interface
interface]
Parameters
violate-action (OPTIONALY) Enter the keywords violate-action to display the
MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning
limit in detail.
interface
interface
(OPTIONAL) Enter the keyword interface with the following
keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Command Modes
• EXEC
839