Reference Guide

E-Series legacy
command
Related
Commands
show ip pim tib — shows the PIM tree information base.
ip mroute
Assign a static mroute.
S4820T
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination
mask command.
Parameters
destination Enter the IP address in dotted decimal format of the destination
device.
mask Enter the mask in slash prefix formation ( /x ) or in dotted decimal
format.
null 0 (OPTIONAL) Enter the keyword null then zero (0).
[ protocol
[ process-id | tag ]
ip-address ]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted
decimal format of the reverse path forwarding (RPF)
neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the IP
address in dotted decimal format of the RPF neighbor. the
range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP address in
dotted decimal format of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF
neighbor.
static ip-address (OPTIONAL) Enter the Static IP address in dotted decimal format of
the RPF neighbor.
ip-address (OPTIONAL) Enter the IP address in dotted decimal format of the RPF
neighbor.
distance (OPTIONAL) Enter a number as the distance metric assigned to the
mroute. The range is from 0 to 255.
Defaults Not configured.
912