Reference Guide

• For a Port Channel interface, enter the keywords port-
channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN, enter the keyword vlan then the VLAN ID. The
range is from 1 to 4094.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Example
FTOS#show ipv6 neighbors
IPv6 Address Expires(min) HardwareAddress State Interface/VLAN/
CPU
---------------------------------------------------------
fe80::201:e8ff:fe17:5bc6
1439 00:01:e8:17:5b:c6 STALE Gi 1/9 - CP
fe80::201:eff:fe17:5bc7
1439 00:01:e8:17:5b:c7 STALE Gi 1/10 - CP
fe80::201:e8ff:fe17:5bc8
1439 00:01:e8:17:5b:c8 STALE Gi 1/11 - CP
fe80::201:e8ff:fe17:5caf
0.3 00:01:e8:17:5c:af REACH Po 1 - CP
fe80::201:e8ff:fe17:5cb0
1439 00:01:e8:17:5c:b0 STALE Po 32 - CP
fe80::201:e8ff:fe17:5cb1
1439 00:01:e8:17:5c:b1 STALE Po 255 - CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/3 Vl 100 CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/5 Vl 1000 CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/7 Vl 2000 CP
FTOS#
924