Reference Guide

The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
area range
Summarize routes matching an address/mask at an area border router (ABR).
S4820T
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address
mask
command.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a
number from zero (0) to 65535.
ip-address Specify an IP address in dotted decimal format.
mask Specify a mask for the destination prefix. Enter the full mask (for
example, 255.255.255.0).
not-advertise (OPTIONAL) Enter the keywords not-advertise to set the status
to DoNotAdvertise (that is, the Type 3 summary-LSA is suppressed
and the component networks remain hidden from other areas.)
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
927