Reference Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
clear ip ospf statistics
Clear the packet statistics in interfaces and neighbors.
S4820T
Syntax
clear ip ospf process-id statistics [interface name {neighbor
router-id}]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no Process
ID is entered, all OSPF processes are cleared.
interface name (OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number information:
• For Port Channel groups, enter the keywords port-
channel then a number. For the C-Series and S-Series, the
range is from 1 to 128.
• For a SONET interface, enter the keyword sonet then the
slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from 1 to
4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
neighbor router-
id
(OPTIONAL) Enter the keyword neighbor then the neighbor’s
router-id in dotted decimal format (A.B.C.D.).
Defaults none
Command Modes EXEC Privilege
930