Reference Guide

• All previous no passive-interface interface commands are removed
from the running configuration.
no passive-interface interface
• Remove the interface from the passive list.
• The ABR status for the router is updated.
• If passive-interface default is specified, then save no passive-
interface
interface into the running configuration.
No passive-interface default
• Clear everything and revert to the default behavior.
• All previously marked passive interfaces are removed.
• May update ABR status.
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
S4820T
Syntax
redistribute {connected | rip | static} [metric metric-value |
metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip |
static} command.
Parameters
connected Enter the keyword connected to specify that information from
active routes on interfaces is redistributed.
rip Enter the keyword rip to specify that RIP routing information is
redistributed.
static Enter the keyword static to specify that information from static
routes is redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The range is
from 0 (zero) to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the
following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the
route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is from
0 to 4294967295.
Defaults Not configured.
957