Reference Guide

Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
default-information originate — generates a default route into the OSPF routing domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
S4820T
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag
tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1 to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-value
number. The range is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the
following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the
route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
958