Reference Guide

ip ftp username
Assign a user name for outgoing FTP connection requests.
S4820T
Syntax
ip ftp username username
To return to anonymous FTP connections, use the no ip ftp username [username]
command.
Parameters
username Enter a text string as the user name up to 40 characters long.
Defaults No user name is configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
Configure a password with the ip ftp password command.
Related
Commands
ip ftp password — sets the password for FTP connections.
ip telnet server enable
Enable the Telnet server on the switch.
S4820T
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
96