Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4820T

1021

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

mode

To receive or transmit, set LLDP.

S4820T

Syntax

mode {tx | rx}

To return to the default, use the no mode {tx | rx} command.

Parameters

tx Enter the keyword tx to set the mode to transmit.

rx Enter the keyword rx to set the mode to receive.

Defaults Both transmit and receive.

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.