Users Guide

Version Description
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Related Commands end — returns to EXEC Privilege mode.
ftp-server enable
Enable FTP server functions on the system.
Syntax
ftp-server [vrf vrf-name] enable
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to enable the FTP server to
listen to that VRF instance.
NOTE: Use this attribute to specify the VRF that is used by the FTP server
to accept client connections. If no VRF is specied, then the default VRF is
used.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
morpheus% ftp 10.31.1.111
Connected to 10.31.1.111.
Control and Monitoring
103