Users Guide
Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced on the E-Series.
Related Commands
monitor session — enables a monitoring session.
monitor session
Create a session for monitoring trac with port monitoring.
Syntax
monitor session session-ID [type { rpm | erpm [set ip dscp dscp_value | set
ip ttl ttl_value]}] [drop]
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
session-ID Enter a session identication number. The range is from 0 to 65535.
type Species one of the following type:
• rpm
• erpm
rpm Creates a remote port monitoring (rpm) session.
erpm Creates an encapsulated remote port monitoring (erpm) session.
set ip dscp Congures the Dierentiated Services Code Point (DSCP) value of the packets in
the Encapsulated Remote Switched Port Analyzer (ERSPAN) trac. To revert to
the default value, use the no form of this command.
dscp_value DSCP value of the packets in the ERSPAN trac. The range is from 0 to 63. The
default value is 0.
1270
Port Monitoring