Users Guide

Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold max-drop-rate
wred_drop 0 0 100
wred_teng_y 467 4671 100
wred_teng_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
test cam-usage
Check the Input Policy Map conguration for the CAM usage.
S4820T
Syntax
test cam-usage service-policy input policy-map stack-unit {[number port-set
portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-unitnumber (OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.
port-set portpipe
number
Enter the keywords port-set then the stack-unit port pipe number. The range is
from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information
This feature allows you to determine if the CAM has enough space available before applying the
conguration on an interface.
An input policy map with both Trust and Class-map conguration, the Class-map rules are ignored and only
the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column contains
the size of the CAM space required for the Trust rule and not the Class-map rule.
The following describes the test cam-usage service-policy input policy-map stack-
unit command shown in the following example.
1340
Quality of Service (QoS)