Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for the secret option and the MD5 password encryption.
Extended the name from 25 to 63 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information To view the dened user names, use the show running-config user command.
Related Commands
password — species a password for users on terminal lines.
show running-cong — views the current conguration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
aaa radius group
Congure the RADIUS server group that is used for Authentication, Authorization and Accounting.
Syntax
aaa radius group group-name
To remove the RADIUS group conguration, use the no aaa radius group group-name command.
Parameters
group-name Enter the name of the RADIUS server group.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
1436
Security