Users Guide

Line starting
with
Description
• Adv sent displays the number of VRRP advertisements sent on the interface.
• Bad pkts rcvd displays the number of invalid packets received on the interface.
Virtual MAC
address
Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the interface is
connected.
Tracking states... Displays information on the tracked interfaces or objects congured for a VRRP
group (track command), including:
• UP or DOWN state of the tracked interface or object (Up or Dn).
• Interface type and slot/port or object number, description, and time since the
last change in the state of the tracked object.
• Cost subtracted from the VRRP group priority if the state of the tracked
interface/object goes DOWN.
Example
Dell#show vrrp ipv6
------------------
TenGigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
fe80::201:e8ff:fe7a:6bb9
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9 (local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
vrrp-ipv6-group
Assign an interface to a VRRP group.
Syntax
vrrp-ipv6-group vrid
Parameters
vrid Enter the virtual-router ID number of the VRRP group. The VRID range is from 1 to
255.
Defaults Not congured.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
1732
Virtual Router Redundancy Protocol (VRRP)