Users Guide

ip prex-list
Enter the PREFIX-LIST mode and congure a prex list.
Syntax
ip prefix-list prefix-name
To delete a prex list, use the no ip prefix-list prefix-name command.
Parameters
prex-name Enter a string up to 16 characters long as the name of the prex list, up to 140
characters long.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information Prex lists redistribute OSPF and RIP routes meeting specic criteria.
Related Commands
show ip route list — displays IP routes in an IP prex list.
show ip prex-list summary — displays a summary of the congured prex lists.
permit
Congure a lter that passes packets meeting the criteria specied.
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a forward lter, use the no permit ip-prefix command.
Access Control Lists (ACL)
255