Users Guide

BGP state ESTABLISHED, in this state for 00:13:55
Last read 00:00:03, Last write 00:00:55
Hold time is 180, keepalive interval is 60 seconds
Received 50 messages, 0 in queue
1 opens, 0 notifications, 34 updates
15 keepalives, 0 route refresh requests
Sent 18 messages, 0 in queue
1 opens, 0 notifications, 0 updates
16 keepalives, 0 route refresh requests
Route refresh request: received 0, sent messages 1
Minimum time between advertisement runs is 30 seconds
Minimum time before advertisements start is 0 seconds
Capabilities received from neighbor for IPv4 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
Capabilities advertised to neighbor for IPv4 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
ADD_PATH(69)
CISCO_ROUTE_REFRESH(128)
For address family: IPv4 Unicast
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
InQ : Added 0, Replaced 0, Withdrawn 0
OutQ : Added 0, Withdrawn 0
Allow local AS number 0 times in AS-PATH attribute
Prefixes accepted 2, withdrawn 15 by peer, martian prefixes ignored 0
Prefixes advertised 0, denied 0, withdrawn 0 from peer
Connections established 1; dropped 0
Last reset never
Local host: 172.16.0.1, Local port: 58145
Foreign host: 172.16.0.2, Foreign port: 179
Dell#
Related Commands
show ip bgp — views the current BGP routing table.
show ip bgp next-hop
View all next hops (using learned routes only) with current reachability and ap status. This command only displays one path, even if
the next hop is reachable by multiple paths.
S4820T
Syntax
show ip bgp [vrf vrf-name] next-hop
Parameters
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view all next hops
corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Border Gateway Protocol
451