Users Guide

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
The following describes the show ip bgp next-hop command shown in the following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has apped.
Flaps Displays the number of times the next hop has apped.
Example
Dell# show ip bgp next-hop
Next-hop Resolved
172.16.0.2 YES
Dell#
show ip bgp paths
View all the BGP path attributes in the BGP database.
Syntax
show ip bgp[vrf vrf-name] paths [regexp regular-expression]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf to view all path attributes in the BGP
database corresponding to that VRF.
NOTE: DescriptionYou can use this attribute to view information on all path
attributes in the BGP database that correspond to either a default or a non-
default VRF.
452
Border Gateway Protocol