Users Guide

Field Description
Time
Established
Display Example
< 1 week 1d21h (DaysHours)
> 1 week 11w2d (WeeksDays)
State/Pfxrcd
If the neighbor is in Established stage, the number of network prexes received.
If a maximum limit was congured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed (Idle,
Connect, Active, OpenSent, OpenConrm). When the peer is transitioning
between states and clearing the routes received, the phrase (Purging) may appear
in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in this column.
Example
Dell#show ip bgp summary
BGP router identifier 192.168.11.5, local AS number 100
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
2 network entrie(s) using 152 bytes of memory
2 paths using 208 bytes of memory
BGP-RIB over all using 210 bytes of memory
2 BGP path attribute entrie(s) using 144 bytes of memory
1 BGP AS-PATH entrie(s) using 10 bytes of memory
2 neighbor(s) using 16384 bytes of memory
Neighbor AS MsgRcvd MsgSent TblVer InQ OutQ Up/
Down State/Pfx
172.16.0.2 200 10 8 0 0 0
00:05:34 2
192.168.10.2 100 0 22 0 0 0
00:00:00 (shut)
Dell#
show running-cong bgp
To display the current BGP conguration, use this feature.
S4820T
Syntax
show running-config bgp
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
Border Gateway Protocol
461