Users Guide
Example
Dell(conf-if-te-1/1)#dcb-policy buffer-threshold test
dcb-policy dcb-buer-threshold (Global Conguration)
Assign the dcb buer threshold policy on the stack ports. To apply the dcb buer threshold policy on the stack-units, use the
conguration mode. To apply on front-end ports, use the interface mode.
Syntax
dcb-policy buffer-threshold stack-unit all stack-ports all profile-name
Parameters
dcb-buer-
threshold
Congure the prole name for the DCB buer threshold
prole-name Enter the name of the prole, which can be a string of up to 32 characters in
length.
stack-unit all Enter the stack unit identication. Indicates the specic the stack unit or units.
Entering all shows the status for all stacks.
stack-port all Enter the port number of a port in a switch stack.
Default None
Command Modes CONFIGURATION mode
Command History
Version Description
9.9(0.0) Introduced on the S6000 and the S6000–ON.
9.8(0.0) Introduced on the S4048-ON.
9.6(0.0) Introduced on the S5000.
9.3(0.0) Introduced on the S4810 and S4820T platforms.
Usage Information You can congure up to a maximum of four lossless (PFC) queues. By conguring four lossless queues, you
can congure four dierent priorities and assign a particular priority to each application that your network is
used to process. For example, you can assign a higher priority for time-sensitive applications and a lower
priority for other services, such as le transfers. You can congure the amount of buer space for each
priority and the pause or resume thresholds for the buer. This method of conguration enables you to
manage and administer the behavior of lossless queues.
Example for
Conguration Mode
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-ports all test
Example for
Interface Mode
Dell(conf-if-te-1/1)#dcb-policy buffer-threshold test
show qos dcb-buer-threshold
Displays the DCB buer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax
show qos dcb buffer-threshold {name}
Data Center Bridging (DCB)
535










