Users Guide

pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
!
dcb-buffer-threshold test2
pfc priority 0 buffer-size 80 pause-threshold 50
!
dcb-buffer-threshold test3
pfc priority 0 buffer-size 80 pause-threshold 60 resume-threshold 30
On interface on which PFC is enabled:
Show interface tengigabitethernet 1/1 pfc buffer-threshold
----------------------------------------------------------------------
Queue# Lossless Buffer-size Pause-threshold Resume-offset Shared threshold
(KB) (KB) (KB) weight
-----------------------------------------------------------------------
0 No - - - -
1 No - - - -
2 Yes - 20 - 9
3 Yes 52 25 15 0
4 Yes - 45 25 5
5 No - - - -
6 No - - - -
7 No - - - -
- Denotes dynamic buffering is enabled in respective queues
On interface in which PFC is not enabled:
Dell#show interface tengigabitethernet 1/20 pfc buffer-threshold
The following table describes the output elds displayed for the show interface pfc buffer-
threshold command:
Field
Description
queue Number of the queue
lossless Whether the queue is a lossy or lossless queue for which buer threshold is
congured
buer-size Ingress buer size
pause-threshold-
value
Buer limit at which the port sends the pause to peer in KB.
resume-threshold-
value
Buer oset limit at which the port resumes the peer in KB.
shared threshold
weight
Weightage of the priorities on the shared buer size in the system.
service-class buer shared-threshold-weight
Create a service class and associate the threshold weight of the shared buer with each of the queues per port in the egress
direction.
Syntax
[No] Service-class buffer shared-threshold-weight {[queue0 number] ||
[queue1 number] || [queue2 number] || [queue3 number] || [queue4 number] ||
[queue5 number] || [queue6 number] || [queue7 number]}
Parameters
buer Dene the shared buer settings
538
Data Center Bridging (DCB)