Users Guide

Dell(config-if-range-te-1/1-2,te-5/1-23)# no shutdown
Dell(config-if-range-te-1/1-2,te-5/1-23)#
Example (Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces to the range.
Dell(config-if)# interface range tengigabitethernet 5/1 - 23,
tengigabitethernet 1/1 – 2,
Vlan 2–100, Port 1–25
Dell(config-if-range-te-1/1-2,te-5/1-23,vl-2-100,po-1-25)# no shutdown
Dell(config-if-range-te-5/1-24,te-1/1-2,vl-2-100,po-1-25)#
Related Commands
interface port-channel — congures a port channel group.
interface vlan — congures a VLAN interface.
show cong (from INTERFACE RANGE mode) — shows the bulk conguration interfaces.
show range — shows the bulk conguration ranges.
interface range macro (dene) — denes a macro for an interface-range.
interface range macro (dene)
Denes a macro for an interface range and then saves the macro in the running conguration.
S4820T
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the interfaces — slot/port,
port-channel, or VLAN number. Select the range of interfaces for bulk
conguration. You can enter up to six comma-separated ranges. Spaces are not
required between the commas. Comma-separated ranges can include VLANs, port-
channels, and physical interfaces.
•
For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
• For a Tunnel interface, enter the keyword tunnel then the tunnel ID. The
range is from 1 to 16383.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
718
Interfaces