Users Guide

show interfaces — displays information on a specic physical interface or virtual interface.
show inventory (S-Series and Z-Series) — displays the switch type, components (including media), Dell
Networking OS version including hardware identication numbers and congured protocols.
show interfaces vlan
Display VLAN statistics.
S4820T
Syntax
show interfaces vlan {vlan-id} [LINE] {description}
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to 4094.
LINE (OPTIONAL) Enter the name of the VLAN.
description Displays the VLAN interface information with description.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Added support to display the interface congurations corresponding to a range of
ports.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series and Z-Series.
Usage Information
NOTE: This command also enables you to view information corresponding to a range of ports.
• You can specify multiple ports as port-range. For example, if you want to display information
corresponding to all ports between 1 and 4, specify the port range as show interfaces
interface-type 1 - 4.
Example
Dell#show interfaces vlan 10
Vlan 10 is up, line protocol is down
Address is 90:b1:1c:f4:99:ce, Current address is 90:b1:1c:f4:99:ce
Interface index is 1107787786
Internet address is not set
Mode of IPv4 Address Assignment: NONE
DHCP Client-ID: 90b11cf499ce
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d17h26m
Queueing strategy: fifo
Time since last interface status change: 2d17h26m
Input Statistics:
0 packets, 0 bytes
Output Statistics:
0 packets, 0 bytes, 0 underruns
Related Commands show interfaces — displays information on a specic physical interface or virtual interface.
754
Interfaces