Users Guide

Example (Member-
Info)
Dell#show ip cam stack-unit 3 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID
----------------------------------------------------------
0 2 00:03:00:00:00:02 Po 10 20
00:01:00:00:00:02 Te 3/42 1000
Dell#
show ip b linecard
View all forwarding information base (FIB) entries.
S4820T
Syntax
show ip fib linecard slot-number [vrf vrf instance | ip-address/prefix-list
| summary]
Parameters
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF instance name
to show the FIB cache entries tied to that VRF instance.
slot-number Enter the number of the line card slot.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only
information on that destination. Enter the IP address is dotted decimal format
(A.B.C.D). Enter the mask in slash prex format (/X).
longer-prexes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prex.
summary (OPTIONAL) Enter the keyword summary to view the total number of prexes in
the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.9.1.0 Introduced VRF on the E-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version 6.1.1.0 Introduced on the E-Series.
844
IPv4 Routing