Users Guide

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0(0.0) Added support for IPv6 for the file-url parameter.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage Information

RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or

without the square brackets.

Reload Dell Networking OS after executing this command. To copy Dell Networking OS from the

management unit to one or more stack members, use the upgrade system stack-unit (S-Series

stack member) command.

Example

Dell# upgrade system ?

ftp:Copy from remote file system(ftp://userid:password@hostip/filepath)

scp:Copy from remote file system(scp://userid:password@hostip/filepath)

tftp:Copy from remote file system(tftp://hostip/filepath)

Dell# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

..................................................

....................................!

12946259 bytes successfully copied

Dell# reload

verify

Validate the software image on the ash drive after the image has been transferred to the system, but before the image has been

installed.

Syntax

verify { md5 | sha256 }[ flash:// ] img-file [hash-value]

Parameters

md5 Enter the md5 keyword to use the MD5 message-digest algorithm.

sha256

Enter the sha256 keyword to use the SHA256 Secure Hash Algorithm

File Management