Users Guide
console
This is the banner
Dell con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line
console
This is the banner
Dell>
Related Commands
line — enables and congures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
Syntax
banner login {keyboard-interactive | no keyboard-interactive} [c line c]
Enter no banner login to delete the banner text. Enter no banner login keyboard-interactive to
automatically go to the banner message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyword keyboard-interactive to require a carriage return (CR) to
get the message banner prompt.
c Enter a delineator character to specify the limits of the text banner. The delineator
is a percent character (%).
line Enter a text string for your text banner message ending the message with your
delineator. The delineator is a percent character (%). Range: maximum of 50 lines,
up to 255 characters per line
Defaults No banner is congured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
90
Control and Monitoring