Owners Manual

NOTE: Use the help or ? command as described in Obtaining Help.

Example of Viewing Disabled Commands

Dell(conf)#interface tengigabitethernet 4/17

Dell(conf-if-te-4/17)#ip address 192.168.10.1/24

Dell(conf-if-te-4/17)#show config

interface tenGigabitEthernet 4/17

ip address 192.168.10.1/24

no shutdown

Dell(conf-if-te-4/17)#no ip address

Dell(conf-if-te-4/17)#show config

interface tenGigabitEthernet 4/17

no ip address

no shutdown

Layer 2 protocols are disabled by default. To enable Layer 2 protocols, use the no disable command.

For example, in PROTOCOL SPANNING TREE mode, enter

no disable to enable Spanning Tree.

Obtaining Help

Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using

the ? or help command:

• To list the keywords available in the current mode, enter ? at the prompt or after a keyword.

• Enter ? after a prompt lists all of the available keywords. The output of this command is the same for

the help command.

Dell#?

cd Change current directory

clear Reset functions

clock Manage the system clock

configure Configuring from terminal

copy Copy from one file to another

debug Debug functions

--More--

• Enter ? after a partial keyword lists all of the keywords that begin with the specified letters.

Dell(conf)#cl?

class-map

clock

Dell(conf)#cl

• Enter [space]? after a keyword lists all of the keywords that can follow the specified keyword.

Dell(conf)#clock ?

summer-time Configure summer (daylight savings) time

timezone Configure time zone

Dell(conf)#clock

Entering and Editing Commands

Notes for entering commands.

• The CLI is not case-sensitive.

• You can enter partial CLI keywords.

Configuration Fundamentals