Reference Guide

1004 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name}
—-can be invoked individually or together, in any sequence.
clear lldp counters
c e s
Clear LLDP transmitting and receiving counters for all physical interfaces or a
specific physical interface.
Syntax clear lldp counters interface
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
clear lldp neighbors
c e s
Clear LLDP neighbor information for all interfaces or a specific interfaces.
Version 8.3.19.0. Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
interface
Enter the following keywords and slot/port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
Version 8.3.19.0. Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series