Reference Guide

1006 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
disable
c e s
Enable or disable LLDP.
Syntax
disable
To enable LLDP, use the
no disable
Defaults
Enabled, that is no disable
Command Modes
CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command
History
packet
(OPTIONAL) Enter the keyword packet to display information regarding
packets coming in or going out.
brief
(OPTIONAL) Enter the keyword brief to display brief packet information.
detail
(OPTIONAL) Enter the keyword detail to display detailed packet
information.
tx
(OPTIONAL) Enter the keyword tx to display transmit only packet
information.
rx
(OPTIONAL) Enter the keyword rx to display receive only packet
information
both
(OPTIONAL) Enter the keyword both to display both receive and transmit
packet information.
Version 8.3.19.0. Introduced on S4820T
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
Version 8.3.19.0. Introduced on S4820T
Version 8.3.7.0 Introduced on S4810
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series